The TV safe area is the central part of the screen where text and graphics are sure to show, even when a TV crops its edges. For gym signage, keep text and logos inside the inner 90% of the frame (about 5% in from every edge), and let backgrounds run to the full edge. That one habit stops class names, timers and offers from being cut off on screens you did not set up yourself. If you run several rooms or locations, we built Kingdom Signage to manage all those screens from one dashboard, so a layout that respects safe margins is applied the same way everywhere.
TL;DR
- Keep text, logos and timers inside the title-safe area: 90% of the frame under the current SMPTE standard, or 5% in from each edge.
- Keep important visuals, such as a demo video subject, inside the action-safe area: 93% of the frame under SMPTE, 3.5% in from each edge under EBU.
- On a 1920x1080 screen, title-safe means a text box of 1728x972 pixels with a 96 px side margin and 54 px top and bottom margin.
- Many TVs still ship with overscan on, so the cropping depends on the screen, not the file. Check the display setting on every TV.
- Different rooms and locations also need the right time zone on the schedule, or a correct layout shows at the wrong hour.
Table of Contents
- What the TV safe area means
- Title safe vs. action safe: the numbers
- What this looks like on a gym wall
- How to turn on safe margins in your design tool
- Check the screen itself, not just the file
- Why safe margins matter beyond broadcast
- A safe-area template you can reuse
- Time zones: the other reason a good layout shows up wrong
- Where Kingdom Signage fits
- FAQ
- Sources
What the TV safe area means
Every video frame has an edge, and not every screen shows that edge. Old CRT television sets varied in how much of the picture they showed, partly because household voltage changed the size of the image. Manufacturers dealt with it by deliberately enlarging the picture so it overfilled the glass, which is called overscan. As Allan Tépper explains at ProVideo Coalition, LCD TVs do not need overscan, yet many still ship with it turned on by default, and many owners never learn the option exists.
The result: a title placed right at the edge of your design can lose its first or last letters on one TV and look fine on the next. Safe areas are the rule that grew out of this. Two nested rectangles are drawn inside the frame:
- Action safe (outer): where important picture content should stay.
- Title safe (inner): where text and graphics should stay.
The same logic is taught in film schools. CalArts' technical support page tells editors to keep subtitles inside the innermost Title Safe rectangle because displays that are not set up properly crop the edges of the picture.
A gym is a harsher environment than a living room. You have a mix of new and old TVs, screens mounted by different installers, and sometimes a TV running through a set-top box or a cheap HDMI adapter. You rarely control every display setting. That is exactly when safe margins pay off.
Title safe vs. action safe: the numbers
The numbers have changed over time, and that is why you will find different advice online.
| Standard | Action safe | Title safe | Notes |
|---|---|---|---|
| Legacy CRT-era (1960s SMPTE practice) | 90% of frame (5% border) | 80% of frame (10% border) | Still the default guide in some editing software |
| SMPTE ST 2046-1 (2009) | 93% | 90% | Modern HD reference, as recommended in Netflix's partner guidance |
| EBU R 095 (16:9) | 3.5% margin | 5% margin | Applies to SD, HD and UHD |
The modern values agree with each other. A 5% margin on each side is the same as a 90% title-safe area, and a 3.5% margin is roughly the 93% action-safe area.
If you do not control the whole chain from your file to the glass, the practical advice from Chris and Trish Meyer is to place text inside the normal title-safe area. They also note that a typical factory default overscan on HDTVs is 5% all around, which is 2.5% per side. A 90% title-safe zone leaves room for that and then some.
For a gym, the legacy 80% figure is an extra-cautious option. It costs you a lot of space, so use it only if you know you have very old displays in a room.

Pixel values for common gym screens
Designers work in pixels, so here is what the percentages mean. Postproduction.studio's safe-areas reference lists the HD values: action safe at 1786x1004 pixels (67 and 38 px margins) and graphics safe at 1728x972 pixels (96 and 54 px margins).
| Screen resolution | Title-safe box (90%) | Side margin | Top and bottom margin |
|---|---|---|---|
| 1920x1080 (Full HD) | 1728x972 | 96 px | 54 px |
| 3840x2160 (4K) | 3456x1944 | 192 px | 108 px |
The 4K row is the same proportions doubled. If your template is built at 1080p and scaled up, one set of margins carries over.
A vertical screen, for example a portrait TV by the studio door, flips the box. Use 5% in from each edge on all four sides and you are protected whichever way the screen is turned.
What this looks like on a gym wall
The rule is easy to say, but gym layouts break it in particular places. These are the elements that most often sit too close to an edge:
- Workout timers. A countdown in the top corner is the classic case. If the corner is cropped, members lose the one number they look at. Keep timer digits well inside the title-safe box.
- Class schedule rows. Time and class name often run in a table from edge to edge. The first column, which holds the time, is the first thing cropped. Put the margin on the table, not on the background.
- Lower-third announcements. A banner such as "Spin moves to Studio B" is usually placed at the bottom. Raise it so its text clears the bottom 5%. CalArts also notes that text at the very bottom is hard to read on large, curved screens where people stand in front.
- Logos and QR codes. A QR code that loses part of its quiet zone may not scan. Keep it inside title safe with room to spare.
- Promotional offers. A price or an expiry line at the edge of a promo tile is both the most important and the most cropped content. Our guide on how class promotions display on gym TVs shows how to lay these out.
What can go outside the margins is background: colors, photographs, gradients and gym branding. Extend them to the full edge so that if a TV shows the whole frame there is no empty border, and if it crops, nothing is lost. Netflix's partner guidance adds a useful detail about motion: moving text is acceptable if it is readable inside safe action at some point, even if it starts or moves outside it. A scrolling ticker can enter from the side, as long as it is readable while it crosses the safe area.
How to turn on safe margins in your design tool
If your team builds promo videos or looped content in a video editor, the guides are built in. In Adobe Premiere Pro, Adobe's help page says to open the Settings (wrench) menu under the Program Monitor and choose Safe Margins, or right-click the preview and click Safe Margins. The overlay shows the outer action-safe and inner title-safe rectangles. They are reference guides only and do not appear in previews or exports.
The defaults are the old ones. In Premiere the standard guides draw action safe at 10% and title safe at 20% of the frame, which are the legacy values. You can change them in File > Project Settings > General. Burner's guide gives the modern numbers to enter and notes that in After Effects the setting lives under Edit > Preferences > Grids & Guides, with action safe at 7% and title safe at 10%.
One sentence of context on those numbers: the percentages in editors describe the total reduction, split across both sides, so 10% in the editor equals 5% per side. That matches the 90% title-safe area above.
If you design in a presentation or graphics tool without safe guides, draw a rectangle at 90% of the canvas and use it as a non-printing layout guide. The point is the same: type inside, backgrounds outside.

Check the screen itself, not just the file
A correct file can still be cropped by the TV. The cause is the overscan setting, and the fix is on the screen. Michael Noland notes that modern TVs often overscan HDMI input to stay compatible with older content, while other input types may display the image one-to-one.
So make a short routine for each new screen:
- Put up a test frame: a bright border at the very edge of the canvas plus text at the 5% line.
- Look at it from where members stand. Can you see the whole border?
- If the border is clipped, open the TV's picture or screen-size menu and look for a setting such as Just Scan, Screen Fit, 1:1, or Native. Names vary by brand.
- Confirm the TV's input resolution is the one you expect, and that the device feeding it outputs the same.
- Record which rooms needed the change, so a replacement TV gets the same treatment.
If every TV is set to show the full frame, you can use more of the screen. Even so, keep the 90% title-safe rule, because a replacement TV, a firmware update or a different input can reset the setting without anyone noticing. Safe margins are insurance against the screens you do not know about.
This is also where a unified setup helps. When we say Kingdom Signage works with your existing screens, it means you do not have to swap hardware to get a consistent result. You keep your TVs, and one layout is applied across rooms.
Why safe margins matter beyond broadcast
Gym content is not broadcast, so is the rule overkill? No, for two reasons.
First, the screens behave the same way. Smart TVs, streaming sticks and set-top boxes all feed images to the same kind of panel with the same overscan options. Tépper's point about the number of users who do not know the setting exists applies directly to a gym, where the person who mounted the TV may not be the person who made the content.
Second, it looks better. Larry Jordan observes that text touching the edge of an image feels uncomfortable to viewers conditioned by decades of television, which is why he frames essential text inside action safe even when broadcast protection is not required. A margin gives a screen a finished look, and that supports the premium impression you want in your lobby. For ideas on what belongs on that screen, see our piece on lobby screen content for gyms, and for the check-in area, front desk signage essentials.
A safe-area template you can reuse
Build one master layout and reuse it for every room. A workable gym template has four zones inside the 90% box:
- Top band: gym logo and the current time or room name.
- Main area: class demo video, timer or schedule table.
- Side or lower panel: next class, announcements, or an offer.
- Footer line: short message, kept above the bottom 5%.
Background art sits behind all of it and runs edge to edge. Then check three things before it goes live: text size is readable from the far side of the room, contrast works under gym lighting, and nothing important sits in the outer 5%.
When a screen is shared between safety messages and promos, the same margins apply to both. Our guide to gym safety messages on screens covers what to show and where, and a safety notice is the last thing you want cropped.
Time zones: the other reason a good layout shows up wrong
A layout that is perfectly framed can still fail if it plays at the wrong time. This is the second half of a safe-area problem, and it comes up as soon as you run more than one location.
Two clocks are involved. The schedule has a time zone, and the device playing it has a time zone. When these disagree, a 6:00 a.m. class countdown can start at 5:00 or 7:00. The usual causes are:
- A screen in a new location was set up with the head office's zone.
- A player device kept its factory zone after being moved.
- Clocks changed for daylight saving on one side and not the other, so content shifts by an hour twice a year.
The safest habit is to define each location's zone explicitly and schedule content in local time for that location, rather than in your own. For a multi-room site the zone is the same, but rooms can still differ if one device was configured by hand. Check that every player shows the right local time, and review schedules right after a clock change, since that is when the mismatch appears.
If you run several locations, our dashboard is built for multi-location management from one place, so you can see and adjust each location's schedule without logging in to separate tools.
Where Kingdom Signage fits
Safe margins, a correct schedule and consistent music and visuals all point at the same job: keeping every screen in the building doing what you intended. Kingdom Signage unifies control of TVs, workout classes and music in one dashboard. It includes class scheduling, workout timers with demo video support, real-time announcements and room-based music, across rooms and locations, and it integrates with the screens you already own instead of requiring hardware replacement.
For a small studio, that means one place to update a class timer or an offer. For an owner with several sites, it means the same layout and schedule logic everywhere. You can start with a free trial or demo and see your own content on your own screens.

Learn more about the platform at Kingdom Signage.
Our view on safe areas
We see the safe area as part of running a gym well, not as a technical footnote. Members glance at a screen for a second or two. If the class time is clipped, or the countdown loses a digit, they do not think "overscan." They think the gym is disorganized.
That is why we built Kingdom Signage around unified control. When the schedule, the timers, the announcements and the music live in one dashboard, a good layout is made once and used in every room. You do not repeat the work for each screen or each tool.
Our advice is simple: design inside the 90% box, let backgrounds bleed, set each TV to show the full picture, and keep each location on its own correct time. Do those four things and your screens will look right, on whatever TVs you have.
Kingdom
FAQ
What is the safe area on a TV?
It is the central part of the picture where text and graphics will be visible even if the TV crops the edges. It comes in two sizes: action safe for important picture content and title safe, a smaller zone, for text. Under the 2009 SMPTE standard, title safe is 90% of the frame.
Do modern flat-screen TVs still need safe areas?
Yes. LCD and LED TVs do not need overscan, but many are shipped with it enabled, and streaming players and TV menus can overlay controls on the edges. Keeping text inside 90% protects you whichever way a screen is set.
How do I show safe margins in Premiere Pro?
Right-click the Program Monitor preview and choose Safe Margins, or use the Settings (wrench) menu under the monitor. The guides are for reference only and do not appear in the exported video. You can change their size under File > Project Settings > General.
What is the difference between title safe and action safe?
Action safe is the larger rectangle for important picture content, such as the subject of a demo video. Title safe is the smaller one for text, logos and timers. Under EBU R 095, these are 3.5% and 5% margins respectively.
Why does my signage show at the wrong hour in one location?
Usually the schedule and the playing device use different time zones, or a clock change was applied on only one of them. Set each location's zone explicitly, schedule in that location's local time, and review schedules after clocks change.
Sources
- Safe Area matters even more in 2025, ProVideo Coalition
- About Subtitles, CalArts 2 Pop
- Title Safe and Safe Action, Netflix Knowledge Hub
- EBU R 095: Safe areas for 16:9 television production
- Let's Be Safe Out There, ProVideo Coalition
- Safe areas visualizer, Postproduction.studio
- Enable safe zones in monitors in Premiere, Adobe
- SMPTE-2046-2 Safe Title Guides for After Effects and Premiere, Burner
- Safe Zones, Michael Noland's Blog
- Display Action / Title Safe Zones, Larry Jordan
